Meadowlark SLM ODP 512x512


The ScanImage driver does not support the ODP feature or hardware triggering on this SLM model.

Hardware Configuration

The unit is connected to the PC via a PCIe card.

Follow the instructions in the SLM manual to connect your SLM to the computer. Verify that the SLM is detected by the PC by running the ‘Blink’ software that is included in the SLM’s installer disk.

Software Configuration

Close the Blink software.

In ScanImage, open the Resource configuration window from the startup dialog or from the Main Controls window under File>Configuration.

From the Resource Configuration window, click the “+” button. Select SLM from the sidebar, and select Meadowlark SLM ODP 512x512. Give it a name and continue.